Piezometric PVC pipes

FIMAP PVC pipes and filters are recognized and highly regarded by the majority of operators in the sector as satisfying any requirement made by companies specializing in water wells.

The use of high quality raw materials and rigorous testing during the production phase ensure that sanitation and technical regulations of most industrial countries are conformed with.

In particular, threading and micro-slotting conform to DIN 4925, or to specific customer requiremen.

FIMAP PVC pipes guarantee:

  • resistance to mould corrosion, sea water, dilute acid and alkaline solutions, stray currents.
  • no scaling.
  • long-term effectiveness.
  • msmoother internal walls guarantee greater hydraulic conductivity along the same diameter as compared to iron pipes.
  • simple connectors: male/female threads according to the Customer’s requirement, with the possibility of inserting an O-ring rubber grommet.
  • ease of transport and fitting.
Description Value Unit Test method
Specific weight1,35 - 1,46g/cm³iso 1183
Linear expansion coefficient0,06 - 0,08mm / m. C°UNI 6061167
Thermal conductivity0,13kcal / mh C°DIN 51612
Traction,pressure and twisting elasticity tests "E"30.000Kg / cm²ASTM D 747
Electrical resistance10^12Ohm cmUNI 4288
Elongation load in traction500 ÷ 550Kg/cm²ASTM D 638
Elongation at traction10%
Water absorption0,04÷0,06mg/cm²ASTM D 570
Destructive elongation100÷170%ASTM D 638
Shock resistance (Test method Charpy)5Kg cm / cm²ASTM D 256-56
Fire resistanceSelf-extinguishingASTM D 635-56 T
Softening temperature82ASTM D 985
The data indicated in the table refer to a temperature of 20 C°.
Operating pressure varies in inverse proportion to temperature.

Piezometric pipes allow problems associated with the study and investigation of contaminated sites and monitoring underground waters to be resolved (piezometric reading of ground water tables.) FIMAP strives to be environmentally friendly and as such proposes products aimed at satisfying any investigative or monitoring requirement.

PVC

Outside diameterInside diameterThicknessMaximum outside diameterThreading Weight
inchmmmmmmkg/m
1/2"21,115,92,626,0Gas0,2
3/4"26,521,32,630,0Gas0,3
1"33,326,73,340,0Gas0,5
1"33,326,73,333,3Trapezoidal0,5
1"1/442,034,63,749,0Gas0,7
1"1/442,034,63,742,0Trapezoidal0,7
1"1/248,040,04,055,0Gas0,8
1"1/248,040,04,048,0Trapezoidal0,8
2"60,051,64,265,0Gas/Trapezoidal1,1
2"60,051,64,260,0Trapezoidal1,1
2"1/275,066,04,581,0Gas/Trapezoidal1,6
2"1/275,066,04,575,0Trapezoidal1,6
3"89,079,05,095,0Gas/Trapezoidal2,0
3"89,079,05,089,0Trapezoidal2,0
4"114,0103,25,3121,0Gas/Trapezoidal2,9
4"114,0103,25,3114,0Trapezoidal2,9